Q5 Quattro V6-3.2L (CALB) (2009)
‹› Replace
‹› 90 Nm plus an additional 90° turn
8
Engine mount
‹› Removing and installing, refer to: Left => [ Left Engine Mount ] See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Left Engine Mount, right => [ Right Engine Mount ] See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Right Engine Mount
‹› Replace in pairs
9
Subframe
10
Bolt
‹› 55 Nm
Hydraulic oil hose bracket - tightening specification
-
Tighten nut - 2 - for the hydraulic oil hose bracket - 1 - to 9 Nm.