Q5 Quattro V6-3.2L (CALB) (2009)
/Page-2878006.png)
CAUTION!
‹› Hold the Hydraulic Cylinder (VAS 6178) securing during the pressing procedure.
‹› The bonded rubber bushing releases "abruptly". There is a risk of the injury from the tools and bonded rubber bushing falling down!
Installation location of front bonded rubber bushing
The anti-twist mechanism (aluminum) - 1 - is perpendicular to direction of travel. The - arrow - points in driving direction.
‹› Before installing the front bushing, carefully pry the anti-twist mechanism - 1 - off the bushing with a screwdriver near the retaining tab - arrows
-. Do this in several steps alternating from side to side.
-
Place the tools on the front bonded rubber bushing as shown in the illustration.
