Q5 Quattro V6-3.2L (CALB) (2009)
-
Remove the front center armrest upholstery => [ Front Center Armrest Upholstery ].
-
Carefully unclip the upper trim - 1 - from the hinge arm and from the lower trim - arrows - using a small screwdriver.
-
Remove the rear center console trim => [ Rear Center Console Trim, with Center Armrest ] See: Console/Service and Repair/Center Console.
-
Fold of the front center armrest.
‹› The illustration shows the front center armrest removed.
-
Unclip the lower trim - 1 - from the front center armrest hinge arm - arrows - using a screwdriver.
Installing
Installation is reverse of removal, but note the following:
-
Press the covers on until they engage audibly.