Q5 Quattro V6-3.2L (CALB) (2009)
Arm Rest: Service and Repair
Front Center Armrest
Front Center Armrest
=> [ Front Center Armrest ]
=> [ Front Center Armrest Upholstery ]
=> [ Hinge Arm Trim ]
Front Center Armrest
Removing
-
Remove the rear center console trim => [ Rear Center Console Trim, with Center Armrest ] See: Console/Service and Repair/Center Console.
-
Versions with a vent: Remove the rear vent air duct.
-
Vehicles with AUX connection: disconnect the AUX connection connector on the bracket.
-
Versions with a telephone/cellular phone: Free the electrical connectors on the bracket.
-
Remove the bolts - 1, 2 and 4 -.
-
Remove the nuts - 3 - and - 5 -.
-
Disengage the top of the center console on the armrest support base by lifting the center console.
-
Pull the armrest support base upward, guide it over the threaded pins and remove it toward the back.
Installing
Installation is reverse of removal.
Tightening Specifications: => [ Front Center Armrest Assembly Overview ] See: Console/Description and Operation.
Front Center Armrest Upholstery
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing