Q5 Quattro V6-3.2L (CALB) (2009)
-
Carefully unclip the cover - 1 - from the upholstery - arrow - using the trim removal wedge (3409).
-
Remove the bolts - 1 - and the upholstery - 2 - upward from the hinge arm - arrow -.
Installing
Installation is reverse of removal, but note the following:
-
Engage the upholstery on the hinge arm and tighten the bolts.
-
Press the cover on until it engages audibly.
Hinge Arm Trim
Removing