Q5 Quattro V6-3.2L (CALB) (2009)
Seat Heater: Overhaul
Backrest Heating Element
Backrest Heating Element
Removing
-
Disconnect cover from upholstery.
-
Cut the electrical wire - 3 - off directly at the old backrest heating element - 2 -.
‹› The old seat heating element remains on the upholstery - 1 - and the new seat heating element is bonded over it.
‹› Ignore - A through D - and - arrows -.
Installing
-
Align new heating element on backrest cushion.
CAUTION!
‹› Make sure the new heating element is affixed to the old heating element.
‹› Remove the protective foil off the heating element in the affixing sequence.
‹› When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.
-
Bond the individual areas of the heating element in the sequence - A and B -.