Q5 Quattro V6-3.2L (CALB) (2009)
-
Install new seal.
-
Turn brake caliper adjuster screw - 1 - back slightly.
‹› This makes it easier to install the actuator.
-
Position the actuator.
‹› Make sure that the seal is seated correctly
-
Item - 2 - Then rotate actuator so bolt hole - a - and threads in brake caliper housing - b - are brought into alignment.
‹› Make sure that parking brake actuator is seated flush against the brake caliper.
-
Attach both actuator bolts (Torx 30).