Q5 Quattro V6-3.2L (CALB) (2009)
Oil Cooler: Service and Repair
Oil Cooler
Oil Cooler
Special tools, testers and auxiliary items required
‹› Used oil collecting and extracting device (V.A.G 1782)
Removing
-
Drain coolant. Refer to => [ Cooling System, Draining and Filling ] See: Cooling System/Service and Repair/Procedures or, in countries with hot
climates, remove the after-run coolant pump (V51) => [ After-Run Coolant Pump ] See: Cooling System/After-Run Coolant Pump/Service and
Repair/After-Run Coolant Pump.
-
Remove bolt - 1 - and nut - 3 - and lock carrier left brace - 2 -.
-
Open clamp and remove coolant hose - 1 - and, if necessary, - 2 - from the oil cooler.
-
Place used oil collection and extraction device ( V.A.G 1782) under engine.
-
Remove bolts - arrows - and oil cooler.
Installing
‹› Tightening specifications. Refer to => [ Oil Pan Upper and Lower Sections, Oil Pump and Oil Cooler Assembly Overview ] See: Service and
Repair.