Q5 Quattro V6-3.2L (CALB) (2009)
/Page-700002.png)
Installation is in reverse order of removal, note the following:
‹› Replace the gasket.
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Install After-Run Coolant Pump (V51). Refer to => [ After-Run Coolant Pump ] See: Cooling System/After-Run Coolant Pump/Service and
Repair/After-Run Coolant Pump.
-
Install lock carrier brace. Refer to => See: Body and Frame/Radiator Support
-
Engine oil level, checking.
-
Fill with coolant => [ Filling ] See: Cooling System/Service and Repair/Procedures.
