Q5 Quattro V6-3.2L (CALB) (2009)
‹› Reduce fuel pressure in the high pressure area=> [ Before Opening High Pressure Fuel Injection System ] See: Cylinder Head Assembly/Fuel
Pressure Release/Service and Repair.
‹› Do not change bent shape
‹› Never bend bracket from the fuel line.
‹› If bracket is bent, or if the fuel line is being replaced, then the bracket must be replaced.
‹› Tightening => [ High pressure line, installing ]
7
Bolt
‹› 9 Nm
8
Threaded support
‹› 40 Nm
9
Stud bolt
10
Nut
‹› 9 Nm
11
Retaining bracket for fuel rail
12
Bolt
‹› 2.5 Nm
13
Bolt
‹› 9 Nm
14
Sleeve
15
Fuel rail
16
Seals
‹› Replace
17
Support ring
‹› Make sure it is seated properly
‹› The fuel rail wields force via the support ring to hold the fuel injector tightly in the cylinder head.
18
O-ring
‹› Replace
‹› Coat with clean engine oil
19
Spacer ring
‹› Replace if damaged
20
Combustion chamber seal
‹› Replacing => [ Fuel Injectors ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair.
21
Radial adjustment