Q5 Quattro V6-3.2L (CALB) (2009)
‹› Replace if damaged
‹› Clip with support ring - 17 -
22
Fuel injector
Removing and installing, refer to => [ Fuel Injectors ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair
High pressure line, installing
-
First tighten the high pressure line union nut by hand.
-
Make sure the high pressure line does not have tension.
-
Use torque wrench (V.A.G 1331) with the 17 mm open end wrench socket (V.A.G 1331/2) to tighten the high pressure line on the fuel rail.
‹› Tightening Specifications High pressure line union nut: 27 Nm