Q5 Quattro V6-3.2L (CALB) (2009)
Intake Manifold: Service and Repair
Intake Manifold, Upper Section
Intake Manifold, Upper Section
Removing
‹› During installation, all cable ties must be re-installed at the same location.
-
Remove front and rear engine covers.
-
Free up hose connection - 1 - to the EVAP canister.
-
Remove vacuum hose - 2 - from the air guide hose connection.
-
Remove air guide hose by loosening the hose clamp - 3 - and opening the clips - arrows -.
‹› Ignore - 4 -.
-
Disconnect vacuum hose - 2 -.
‹› Disregard - arrow -.
Disconnect the following electrical connectors.