Q5 Quattro V6-3.2L (CALB) (2009)
If the valve seal removal tool (3364) cannot be used, on several valve stem seals due to restricted clearance, proceed as follows:
-
Drive out the roll pin - arrow - on the puller with a drift and remove the impact puller attachment.
-
Position lower section of the valve seal removal tool (3364) on the valve stem seal.
-
Secure puller with a drift or cotter pin drive - 1 - as shown in the illustration.
-
Position valve lever on the puller and remove the valve stem seal - arrow -.
CAUTION!