Q5 Quattro V6-3.2L (CALB) (2009)
/Page-769005.png)
-
Clean upper and lower cylinder head gaskets; they must free from oil and grease.
‹› Note the expiration date of the sealing compound.
-
Cut the tube nozzle at the front marking (nozzle diameter approximately 2 mm).
‹› The sealant must be applied to several places on the engine, as described in the following.
-
Lightly coat top and bottom cylinder head seal sealing surfaces with lubricant by bending the seals down slightly again - arrows -.
-
Use a flat object such as a feeler gauge to coat the surface between the cylinder head and seal.
