Q5 Quattro V6-3.2L (CALB) (2009)
-
Remove the left center vent motor (V110) - B -. Refer to => [ Left Center Vent ].
-
Mark the connector - C - (to prevent confusing it with other connectors).
-
Disconnect the connector - C -.
-
Remove the screws - B -.
-
Loosen the pin - D - (on the control motor bracket - E -) from the toothed segment - F - (temperature door shaft) and remove the bracket - E -
(with the control motor) in the direction of the arrow.
-
Remove the screws - A - and separate the control motor - B - from the bracket - D -.