Q5 Quattro V6-3.2L (CALB) (2009)
-
Carefully connect the various connector rods - A - through - D - to the levers of each door.
‹› The connecting rods ( from- A - through - D -) are clipped on to the levers; clip them carefully so that the lever does not get damaged.
‹› There are different versions of the lever and connecting elements on the A/C depending on the when the vehicle was produced. Refer to => See:
Air Door/Description and Operation.
-
Install the screw - C - (and screw - F -).
-
Carefully connect the connector rod - B - (so the lever does not get damaged) from the lever to the right temperature door - A -.
‹› There are different versions of the lever and connecting elements on the A/C depending on the when the vehicle was produced. Refer to => [ Air
Conditioner, Levers and Connecting Elements ] See: Air Door/Description and Operation.
-
Install the wiring- E - into the mounting points on the mounting plate as illustrated so that it cannot come into contact with any moving parts.