Q5 Quattro V6-3.2L (CALB) (2009)
CAUTION!
The rain/light recognition sensor must be free of inclusions and bubbles on the windshield to function properly.
-
Press sensor clips on mirror base.
Replace the Rain/Light Recognition Sensor
‹› To remove sensor, proceed as described above.
-
If necessary, completely remove any foil from the old rain/light recognition sensor from the windshield.
-
Clean the contact surface on the windshield using cleaning solution D 009 401 04.
-
Press the surface - arrows - on the cap - 1 - lightly together and pull it off the rain/light recognition sensor- 2 -.