Q5 Quattro V6-3.2L (CALB) (2009)
Headlamp Switch: Service and Repair
Light Switch
Removing
-
Switch off ignition and remove ignition key.
-
Turn light switch into "0" position.
-
Pry the instrument panel side cover - 1 - up using the trim removal wedge (3409) - arrow - and remove it.
-
Release the retaining clips - arrow A - and tilt the fuse panel C (SC) - item 2 - in the - direction of arrow B - on the instrument panel central tube
- 1 -.
-
Reach through the opening on the side of the instrument panel and push the light switch (E1) - 1 - toward the rear and out of the instrument panel
cover on the driver side - arrow -.