Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1123004.png)
‹› With the engine at idle, a value of approximately 35 kPa is displayed. This is the actual pressure in the fuel system generated by the high pressure
pump.
‹› The unit "kPa" is also used instead of "bar": 1 bar = 1 kPa.
1. Control module identifications
-
Pry cover - 1 - on the left of the instrument panel off, for example, using the trim removal wedge (3409) - arrow -.
-
Remove fuse 3 (SC3) (third from the top) in the driver side instrument panel fuse holder - ST2 - (brown).
