Q5 Quattro V6-3.2L (CALB) (2009)
Tire Pressure Module: Service and Repair
Tire Pressure Monitoring Control Module
Tire Pressure Monitoring Control Module
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1783)
Removing
The Tire Pressure Monitoring Control Module (J502 ) is located in the right front footwell under the instrument panel.
Before removing the Tire Pressure Monitoring Control Module (J502), perform Guided Fault Finding under "replace control module".
-
Remove glove compartment. Refer to => Body Interior
69 Removal and Installation.
-
Remove sill panel strip. Refer to => Body Interior
70 Removal and Installation.
CAUTION!
‹› Make sure the carpet does not tear when handling it.
-
Carefully lay the carpet aside with the help of a second technician.
-
Move the insulating mat - arrow - up.
-
Release and remove the connector - 3 -.