Q5 Quattro V6-3.2L (CALB) (2009)
Shift Interlock Control Module: Service and Repair
Selector Lever Sensor System Control Module
Removing
-
Remove selector lever handle => [ Selector Lever Handle ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter
A/T/Service and Repair/Removal and Replacement/0B5A Transmission/Selector Lever Handle.
-
Remove the front ashtray.
-
Disconnect electrical connector - 1 -.
-
Release the 4 retaining tabs - arrows - and remove the Selector Lever Sensor System Control Module (J587).
‹› Disregard the - A arrow -.
Installing