Q5 Quattro V6-3.2L (CALB) (2009)
Seat Belt: Service and Repair
Rear Seat Belt Anchor In Center Seating Position
Rear Seat Belt Anchor in Center Seating Position
Removing
-
Remove the left two third rear seat => [ Rear Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seats.
-
Remove the bolt - 2 - and the seat end fitting - 3 -.
Installing
Installation is reverse of removal, but note the following:
-
Replace the belt anchor bolt.
-
If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.
-
Install the seat belt anchor - 3 - so that the recess fits into the tab - 1 - on the seat frame.
Tightening specifications => [ Rear Center Three-Point Seat Belt Assembly Overview ] See: Testing and Inspection.