Q5 Quattro V6-3.2L (CALB) (2009)
Seat Belt: Service and Repair
Front Latch Child Seat Anchors
Front LATCH Child Seat Anchors
Removing
-
Bring headrest into lowest lock position.
-
Move the passenger seat into a higher position.
-
Remove the bolts - 2 and 3 -.
-
Remove LATCH anchor - 1 - toward rear.
‹› The seat and LATCH anchor are shown without the cover.
Installing
Installation is reverse of removal, but note the following:
-
Replace the bolts, coat with locking compound fluid (D 000 600 A2) and tighten.
Tightening specifications => [ Front LATCH Child Seat Anchors Assembly Overview ] See: Child Restraint/Child Seat Tether
Attachment/Description and Operation.