Q5 Quattro V6-3.2L (CALB) (2009)
-
Disconnect electrical wire - 2 - from starter.
-
Remove the bolt - 1 - and the rear extension from the transmission.
-
Remove the bolt - 4 - and remove the starter.
‹› - Item 1 - is reached from above.
Installing
‹› Tightening specifications. Refer to => [ Fastener Tightening Specifications ] See: Specifications.
Install in reverse order of removal, observing the following:
-
Install the engine support and the right engine mount. Refer to
-
Align the exhaust system so that there is no tension.
-
Connect battery. Refer to => [ Battery, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal and Replacement/Battery.