Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1765007.png)
-
Use the upper screw - 2 - and lower screw - 1 - for precision adjustment in "Guided Fault Finding".
CAUTION!
The ACC adjustment is only accepted if "actuator diagnosis ended " is displayed in (VAS 5051/B).
-
Switch ignition off.
-
Disconnect Diagnostic Cable (VAS 5051/5A) connector from diagnostic connection.
-
Disconnect battery charger. Refer to => Electrical
Equipment 27 Description and Operation.
-
Install the air intake grille. Refer to => Body Exterior
63 Removal and Installation.
