Q5 Quattro V6-3.2L (CALB) (2009)
Steering Column Control Module: Service and Repair
Steering Column Switch Module and Electronic Ignition Lock Assembly Overview
Steering Column Switch Module and Electronic Ignition Lock Assembly Overview
1
Screw
‹› 0.5 Nm
2
Transport Protection
3
Steering Column Electronic Systems Control Module (J527)
‹› With airbag spiral spring/return spring with slip ring (F138), steering angle sensor (G85)
‹› Removing and Installing, refer to => [ Steering Column Electronic Systems Control Module ] See: Steering/Steering Column/Service and
Repair/Removal and Replacement/Steering Column Controls and Switches
CAUTION!
Risk of damaging coil connector.
‹› Coil connector with slip ring is not to be turned following removal.
‹› Connector assignment of steering column electronic systems control module (J527) => [ Steering Column Electronic Systems Control Module
Connector Assignment ] See: Diagrams
4
Mount
‹› With turn signal switch (E2), windshield wiper/washer switch (E22)