Q5 Quattro V6-3.2L (CALB) (2009)
‹› On vehicles with cruise control with cruise control switch (E45)
‹› Removing and Installing, refer to => [ Turn Signal Switch, Cruise Control Switch and Windshield Wiper/Washer Switch ] See:
Steering/Steering Column/Service and Repair/Removal and Replacement/Steering Column Controls and Switches
5
Clamping Ring
6
Screw
‹› 4 Nm
7
Steering Column
8
Access/Start Authorization Switch (E415)
‹› Removing and Installing, refer to => [ Access/Start Authorization Switch ] See: Steering/Steering Column/Service and Repair/Removal and
Replacement/Steering Column Controls and Switches
9
Divider
‹› for Access/start authorization switch (E415)
‹› Removing and Installing, refer to => [ Access/Start Authorization Switch ] See: Steering/Steering Column/Service and Repair/Removal and
Replacement/Steering Column Controls and Switches
10
Ignition Key
Access/Start Authorization Switch Tightening Specification
-
Tighten the bolt - 2 - on the access/start authorization switch (E415) - item 1 - to 3 Nm.