Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1807003.png)
-
Remove the ribbed belt from the power steering pump belt pulley.
-
Release tensioner and remove the tool.
-
Mark the position of the belt pulley to the hub. Make a marking - arrow -.
‹› If the power steering pump will be replaced, transfer the marking from the hub on the old pump to the new one.
‹› Because of space restrictions, it is not possible to see the position of the belt pulley holes to the holes in the hub when installing.
-
Remove bolts - arrows -. Use Spanner Wrench (3212) as counterhold.
