Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1807004.png)
-
Remove belt pulley for power steering pump.
-
Place the Drip Tray under the power steering pump.
-
Carefully cut through the cable ties - 1 - for the wiring harness - 2 - if applicable.
-
Remove the clamp - 4 - from the intake hose - 3 -. Remove the suction hose - 3 -.
-
If the pressure line is also attached to the A/C compressor, then remove the bolt - C - for the bracket - D -.
