Q5 Quattro V6-3.2L (CALB) (2009)
-
Press bearing - 3 - into track control arm - 4 -.
-
Note the installation depth marking when installing - arrow -.
-
Check rim offset of bearing - 1 - in track control arm - 2 -.
Dimensions - a - and - b - must be identical.
-
If dimensions - a - and - b - are different, press the bearing - 1 - in more.
-
Install track control arm. Refer to => [ Track Control Arm ] See: Service and Repair/Front Suspension/Track Control Arm.
Bearing for track control arm (on subframe side), pressing out and pressing in
Special tools, testers and auxiliary items required
‹› Thrust Plate (VW 402)
‹› Punch (VW 412)
‹› Assembly Tool (3301)
‹› Assembly Tool (3346)
‹› Assembly Paste
‹› Hold track control arm firmly in position while pressing bearing out and in.
Bearing, Removing
-
Remove track control arm. Refer to => [ Track Control Arm ] See: Service and Repair/Front Suspension/Track Control Arm.
-
Mark the installation depth - arrow - on the bearing - 3 -.