Q5 Quattro V6-3.2L (CALB) (2009)
Use a waterproof felt-tip pen for marking.
-
Install the special tools as shown in the illustration.
1. Punch (VW 412)
2. Assembly Tool (3346)
3. Rubber mount
4. Control Arm
5. Support Sleeve (3301/4)
6. Bearing Race (3301/1)
7. Thrust Plate (VW 402)
-
Press bearing - 3 - out of track control arm - 4 -.
Bearing Race, Installing
-
Transfer the installation depth marking from the old bearing to the new one.
Mounting installation location