Q5 Quattro V6-3.2L (CALB) (2009)
-
Remove bolt - 2 - and the bracket with lines - 6 -.
-
Remove brake caliper and brake disc. Refer to =>
Brake System 46 Removal and Installation.
-
Secure brake caliper to body so weight of caliper does not stress or damage brake hose or brake line.
-
Remove bolts - 1 - and the cover plate - 2 -.
-
Remove Rear Speed Sensor - 1 -. Remove bolt - 2 - to do so.
-
Remove coil spring. Refer to => [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair.
-
Mark the position of the bolt - 1 - to the wheel bearing housing - 2 -.