Q5 Quattro V6-3.2L (CALB) (2009)
-
Always set the wheel bearing down on the wheel hub - 2 -.
The same procedure also applies to the wheel bearing without a wheel hub.
Installing
Installation is in reverse order of removal. Observe the following when doing so:
Tightening specifications. Refer to: => [ Wheel Bearing Housing, Wheel Bearing Unit, Shock Absorber Coil Spring Assembly Overview ] See: Rear
Knuckle/Service and Repair/Rear Suspension/Wheel Bearing Housing, Wheel Bearing Unit, Shock Absorber Coil Spring Assembly Overview.