Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1916001.png)
Wheel Bearing: Removal and Replacement
Wheel Bearing Unit
Wheel Bearing Unit
Removing
-
Remove wheel bearing housing. Refer to => [ Wheel Bearing Housing ] See: Rear Knuckle/Service and Repair/Rear Suspension/Wheel Bearing
Housing.
-
Clamp the wheel bearing housing in a vise with aluminum protective covers.
-
Remove bolts - 1 - and the wheel bearing unit - 2 -.
CAUTION!
‹› Avoid contaminating with dirt and damaging the seal when setting down/storing.
The wheel bearing - 1 - must always face up.
