Q5 Quattro V6-3.2L (CALB) (2009)
Wheel Bearing: Removal and Replacement
Wheel Bearing Unit, Servicing
Wheel Bearing Unit, Servicing
Special tools, testers and auxiliary items required
‹› Thrust Plate (VW 401)
‹› Thrust Plate (VW 402)
‹› Punch (VW 412)
‹› Assembly Tool (T10230)
‹› - 3 - Separating Device (Kukko 15/3 with 17/3)
‹› Wheel bearing housing removed. Refer to => [ Wheel Bearing Unit ] See: Wheel Bearing Unit
Wheel Hub, Removing from Wheel Bearing
-
Install special tools as shown in illustration.
1. Punch (VW 412)
2. Sleeve (T10230/8) from the Assembly Tool (T10230)
3. Thrust Piece (T10230/3) from the Assembly Tool (T10230)
4. Wheel bearing unit
5. Thrust Plate (VW 402)
6. Thrust Plate (VW 401)
-
Press the wheel hub out of the wheel bearing.