Q5 Quattro V6-3.2L (CALB) (2009)
Remove the bearing inner race from the hub.
-
Insert the separating tool between the bearing inner race - 1 - and the wheel hub - 2 - and tighten with the spindle.
‹› Use a commercially available separating tool such as the Kukko 15/3 with 17/3.
-
Install special tools as shown in illustration.
1. Punch (VW 412)
2. Sleeve (T10230/8) from the Assembly Tool (T10230)
3. Thrust Piece (T10230/3) from the Assembly Tool (T10230)
4. Wheel hub
5. Bearing inner race