Audi Workshop Service and Repair Manuals

Wheel Bearing: Removal and Replacement
Wheel Bearing Unit

Wheel Bearing Unit

Removing

-

Remove wheel bearing housing. Refer to => [ Wheel Bearing Housing ] See: Suspension/Rear Knuckle/Service and Repair/Rear
Suspension/Wheel Bearing Housing.

-

Clamp the wheel bearing housing in a vise with aluminum protective covers.

-

Remove bolts - 1 - and the wheel bearing unit -  2 -.

CAUTION!
‹› Avoid contaminating with dirt and damaging the seal when setting down/storing. 

The wheel bearing - 1 - must always face up.