Q5 Quattro V6-3.2L (CALB) (2009)
Transmission Mount: Service and Repair
Tunnel Crossmember
Tunnel Crossmember
Special tools, testers and auxiliary items required
‹› Engine/Transmission Jack (V.A.G 1383 A)
‹› Final Drive Support (T10337)
Removing
-
Remove the rear noise insulation - 2 -.
-
Mount the Gearbox Support (T10337) on the Engine/Transmission Jack (V.A.G 1383 A) and attach it to the bottom of the transmission.
-
Raise transmission slightly.