Q5 Quattro V6-3.2L (CALB) (2009)
‹› If the tab on the backside of the wiring harness breaks off, the wiring harness must be replaced.
-
Carefully insert the connector - C - into the mechatronic connector socket.
Further installation in reverse order, paying attention to the following:
-
Install the oil filter. Refer to => [ Oil Filter ] See: Fluid Filter - A/T/Service and Repair/Removal and Replacement/0B6A Transmission.
-
Install the oil pan. Refer to => [ Oil Pan ] See: Fluid Pan/Service and Repair/0B6A Transmission/Oil Pan.
-
Fill the transmission with fluid. Refer to => [ ATF, Draining Or Filling after Repair ] See: Fluid - A/T/Service and Repair/0B6A
Transmission/ATF, Draining or Filling after Repair.