Q5 Quattro V6-3.2L (CALB) (2009)
‹› Oil pan to transmission.
2
Oil pan drain plug
‹› 12 Nm
‹› Replace
3
Oil pan inspection plug
‹› 9 Nm
4
O-ring
‹› Replace
5
Oil pan
‹› Removing and installing, refer to => [ Oil Pan ] See: Fluid Pan/Service and Repair/0B6A Transmission/Oil Pan.
6
Magnet
‹› Quantity: 2 round magnets, different from illustration.
‹› Ensure full surface contact.
‹› Clean before installation.
7
Cover cap
‹› Inserted in oil pan opening.
8
Not installed
9
Oil pan gasket
‹› Replace
10
Oil filter
‹› Removing and installing, refer to => [ Oil Filter ] See: Fluid Filter - A/T/Service and Repair/Removal and Replacement/0B6A Transmission.
11
O-ring
‹› Replace
12
Wiring harness connector securing clip
13
Wiring harness
‹› Removing and installing, refer to => [ Wiring Harness ] See: Wiring Harness.
14
Bolt
‹› 8 Nm
‹› Following removal and installation instructions, refer to => [ Mechatronic ] See: Mechatronic.
15
Mechatronic
‹› Removing and installing, refer to => [ Mechatronic ] See: Mechatronic.
16
Seal