Q5 Quattro V6-3.2L (CALB) (2009)
/Page-1357006.png)
Inner groove - arrow A - must remain visible " identification groove" (for correct installation of CV boot).
Version with base:
-
Position protective joint boot between - arrows -.
-
Slide the circlip - 1 - over the splines.
‹› The circlip - 1 - must engage the groove.
‹› The Assembly Tool - 3 - ( T10065/2), (T10065/3) or (T10065/6) fits into the axle shaft from underneath.
