Q5 Quattro V6-3.2L (CALB) (2009)
-
Position the puller (T10369/1) on the wiper arm - 1 - as illustrated.
-
Position the thrust piece - 2 - on the wiper axle.
-
Rotate the bolt - 3 - clockwise until the wiper arm is removed from the axle.
-
Remove nut completely and remove wiper arm.
Installing
Install in reverse order of removal, observing the following:
-
Adjust wiper arm. Refer to => [ Wiper Arm, Adjusting ] See: Adjustments/Wiper Arm, Adjusting.