Q7 Quattro V6-3.6L (BHK) (2007)
/Page-7570002.png)
-
Insert upper A-pillar trim - 1 - in ribbed instrument panel ridge - 2 - in - direction of arrow -.
-
Tip upper A-pillar trim - 2 - toward body and clip in clamps without clamping side curtain airbag - 5 -.
-
Align hole in adapter - 4 - to threaded hole in body.
-
Tighten screw - 3 - to tightening torque.
-
Clip in cover cap - 1 - with Airbag symbol and draw door seal lip - 6 - over upper A-pillar trim.
Tightening torque
Component
Nm
Upper A-pillar trim to body
3 *
* Replace screw