Q7 Quattro V6-3.6L (BHK) (2007)
Trim Panel: Service and Repair
Lower A-Pillar Trim, Removing and Installing
Lower A-pillar Trim, Removing And Installing
Special tools, testers and auxiliary items required
-
Trim removal wedge 3409
Removing
-
Remove bar piece.
Driver side only
-
Pull operating lever - A - in - direction of arrow 1 - , hood is released.
At the same time, operating lever is guided out of guide in lower A-pillar trim - C -.
-
Insert a small screwdriver into gap between operating lever - A - and clip - B -.
-
Pry clip - B - out of operating lever - A -.
-
Then, remove operating lever from mount in mounting bracket in - direction of arrow 2 -.
Procedure for both sides of vehicle
Remove sill panel strip - D - from sill in transition area from B-pillar to lower A-pillar trim.
Drivers side
-
Remove screws - arrows -.