Q7 Quattro V6-3.6L (BHK) (2007)
-
Guide seat belt - 3 - through opening - arrow A - in wheel housing trim - 2 -.
-
Secure belt anchor/seat belt with screw - 1 - to body, anchor depression - arrow B - must face toward round projection on body - arrow C -.
-
Insert wheel housing trim with mounts - 1 - in luggage compartment side trim - 2 -.
-
Clip wheel housing trim with clamps - 3 - to C-pillar while inserting tab - arrow A - in recess - arrow B - in C-pillar trim.
-
Draw door seal lip - 4 - over wheel housing liner.
Tightening torque
Component
Nm
Seat belt anchor to body
55