Q7 Quattro V6-3.6L (BHK) (2007)
Head Rest: Service and Repair
Cover and Upholstery For Headrests With Slide In Locking Mechanism, Removing and Installing
Cover And Upholstery For Headrests With Slide In Locking Mechanism, Removing And Installing
Special tools, testers and auxiliary items required
-
Trim removal wedge 3409
Removing
-
Remove headrests.
-
Mechanically adjustable seat
-
Memory seat, electric seat
-
Disengage sill panel strips - 2 - from guide channel - 1 - by prying with Trim Removal Wedge 3409.
-
Use Trim Removal Wedge 3409 to lift cover over knob trim plate - 3 -.
-
Remove head restraint mount - 1 - from upholstery with cover - 2 -. Begin on side opposite to knob - 3 -.
-
Remove padding from cover.
Installing