Q7 Quattro V6-3.6L (BHK) (2007)
8 -
Brake line
^
Via intermediate piece toward right rear brake caliper
^
Marked on hydraulic unit with - HR
9 -
Intermediate piece
10 -
Bracket
11 -
Flange bolt
^
Torque specification 5 Nm
12 -
Hex head bolt
^
Torque specification 8 Nm
13 -
Buffer
14 -
Gasket
^
For brake booster
15 -
Brake booster
^
Component location: In engine compartment, left.
^
Functional check:
^
With engine switched off, depress brake pedal firmly several times (to deplete vacuum in tool).
^
Depress and hold brake pedal with average foot pressure and start engine. If brake booster is working properly, pedal will be felt to give
noticeably under foot (booster assist becomes effective).
16 -
Brake Booster Membrane Position Sensor
Note: Removal is not allowed.
17 -
Sealing plugs
^
Connection for vacuum hose
18 -
Vacuum hose
^
Insert into brake booster
19 -
Sealing ring
20 -
Self-locking hex nut
^
Torque specification 49 Nm
^
Always replace after removal
21 -
Bracket
22 -
Master brake cylinder
^
Cannot be serviced. Replace as complete unit if malfunctioning.
23 -
Sealing plugs
^
Moisten with brake fluid and press into brake fluid reservoir
24 -
Brake fluid reservoir
25 -
Cap
^
With float warning indicator sensor