Q7 Quattro V6-3.6L (BHK) (2007)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Unit, Brake Booster/Brake Master Cylinder, Assembly Overview
Hydraulic unit, brake booster/brake master cylinder, assembly overview
1 -
ABS control module J104
^
Component location: In right engine compartment below engine control module.
CAUTION! Disconnecting ABS control module J104 and ABS Hydraulic Unit N55 is not permitted.
2 -
ABS Hydraulic Unit N55
^
Component location: In right engine compartment below engine control module.
3 -
Brake line
^
Brake master cylinder/primary piston circuit to hydraulic control unit
^
Identification: At hydraulic unit - DK
4 -
Brake line
^
Brake master cylinder/secondary piston circuit to hydraulic unit
^
Identification at hydraulic unit - SK
5 -
Brake line
^
Via intermediate piece toward left rear brake caliper
^
Marked on hydraulic unit with - HL
6 -
Brake line
^
Via intermediate piece toward right front brake caliper
^
Marked on hydraulic unit with - VR
7 -
Brake line
^
To left front brake caliper
^
Marked on hydraulic unit with - VL