Q7 Quattro V6-3.6L (BHK) (2007)
/Page-2187009.png)
-
Rotate crankshaft 2 revolutions in direction of engine rotation at vibration damper bolt and place at "TDC" marking.
‹› Markings on vibration damper and sealing flange must align - arrow -.
‹› Camshaft bar (T10068 A) must engage in grooves on both camshafts at the same time.
‹› Due to the camshaft adjuster function, the camshaft grooves may not be perfectly horizontal. Therefore, turn the camshaft back and forth slightly
with an open end wrench - arrows - if necessary to insert the camshaft bar (T10068 A).
