Q7 Quattro V6-3.6L (BHK) (2007)
‹› If camshaft bar cannot be engaged, adjust timing again.
‹› Rotate crankshaft 2 revolutions in direction of engine rotation at vibration damper bolt and place at "TDC" marking.
‹› Check timing again.
-
Install timing chain lower cover => [ Lower Timing Chain Cover ] See: Timing Cover/Service and Repair/Lower Timing Chain Cover.
-
Install oil pan => [ Installing ] See: Engine Lubrication/Oil Pan/Service and Repair/Oil Pan.
-
Install drive plate => [ Drive Plate ] See: Transmission and Drivetrain/Flex Plate/Service and Repair/Drive Plate.
-
Install cylinder head cover => [ Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service and Repair
-
Install engine => [ Engine, Installing ] See: Service and Repair/Engine, Installing.
-
Fill engine oil and check oil level